TheHive 3.3-RC2, Hot out of the Oven

TheHive Project’s code Chefs, dressed in their outright haute cuisine outfit, including the traditional toque blanche, have been quite busy lately, working on dockerizing all the Cortex analyzers (more on this later in an upcoming post), and doing tedious work to prepare the replacement of Elasticsearch by a GraphDB which will help us finally release much-awaited features such as multi-tenancy, delayed for way too many months (yeah, yeah, don’t chastise them but feel free to help them). In the meantime, they found enough bandwidth to release a new major version of TheHive.

Version 3.3, currently a release candidate includes several bug fixes and many new features as outlined below. Please note that TheHive 3.3-RC2 is beta software. As all our other release candidates, you can grab it from the pre-release, beta repositories. As usual, we would truly appreciate your help making it a great stable release by testing it as thoroughly as possible and reporting back any bugs or issues you encounter so we can address them before the final release.

Check TheHive Installation guide for further details.

Wait! Where’s RC1?

TheHive 3.3-RC1 was very short-lived. Few hours after its release, and thanks to Chris (a.k.a. crackytsi on GitHub), Thomas Franco, our back-end mastermind, discovered an issue with the Debian 8 and Debian 9 packages.

New Features

  • #836: add a new exportCaseTags parameter to the MISP configuration section. If set to true, all the tags associated with a case will be exported along with it to MISP.
  • #861: add support for Java higher than 8, such as OpenJDK 11.
  • #271: bulk merge alerts into a case. Select multiple alerts at once and create a single case out of them or merge them into an existing case using its ID.
  • #824: add ability to sort alerts by reference, status, type, source…
  • #826: when previewing an alert, there are sometimes no overlap with an existing case. However, an analyst might already know, thanks to HI (Human Intelligence), that the alert should be merged into a specific case. This is now possible thanks to a new button.
  • #769: improve case template selection for case creation. If you have defined a large set of case templates, you will be able to sort/filter to find the case you want to use when creating a New Case.
New case template selector
  • #657: add observable tags auto-completion. Contributed by Tyler Chong (Thanks!).
Observable tag auto-completion

Fixed Bugs

  • #864: do not return a session cookie when making an API call.
  • #856: there was a bug where after a followed alert PATCH, if the alert has already been promoted to a case, the case is not updated. Now, if the alert has follow=true, if it gets updated, its status is set to Updated and the related case is updated too.
  • #845: assigned but unstarted tasks were not showing up in My Tasks.
  • #844: enable user account locking through the Delete API endpoint.

Stuck?

Something does not work as expected? You have troubles installing or upgrading? No worries, please join our user forum, contact us on Gitter, or send us an email at support@thehive-project.org. We are here to help.

TheHive4py 1.5.1 Released

When you need to interact with TheHive’s REST API and you ain’t shy of working with Python, TheHive4py is the way to go. It’s a free, open source library we provide to allow you to easily create alert feeders, automate certain tasks like creating cases, assign them to analysts and much more. For example, Synapse, DigitalShadows2TH and Zerofox2TH leverage the library to send alerts to your favourite SIRP/SOAR.

Sometime ago, we decided that it was time to overhaul the whole library and we began working on version 2.0.0 which will be easier to use. It should also support the full set of TheHive’s REST API calls. In the meantime we decided to release version 1.5.0, shortly followed by version 1.5.1 to support some new functionality contributed by our user community and correct a few issues.

code_quality
Source : XKCD

New Features Introduced in 1.5.0

Bugfixes Introduced in 1.5.0

  • #80: Prevent max recursion depth exceeded error, contributed by Psynbiotik

New Features Introduced in 1.5.1

Important note: TheHive4py 1.5.1 does not work with TheHive 3.0.10 or earlier versions. Please stick with 1.5.0 if you are using those versions.

Updating/Installing

To update your existing package:

$ sudo pip install thehive4py --upgrade

If you are just getting started with TheHive4py, you can forgo the --upgrade at the end of the command above.

But I just Wanna Play!

If you’d like to play around with TheHive4py 1.5.1, TheHive 3.1.1., Cortex4py 2.0.1 and Cortex 2.1.1, please download the training VM.

Paris? Are you There?

Shall you encounter any difficulty, please join our  user forum, contact us on Gitter, or send us an email at support@thehive-project.org. As usual, we’ll be more than happy to help!

Correction: October 12, 2018
As reported by Robin Hahling, TheHive 1.5.1 does not work with TheHive 3.0.10 or earlier versions.

TheHive 3.1.0-RC2 is Out!

After a nice summer break which allowed us to rest and enjoy Real Life™ (mostly) away from keyboards, screens and constant distractions and interruptions, we set to take into account the bug reports and feedback on TheHive 3.1.0-RC1 which we released a day or so before packing up for the mountains and elsewhere.

We are pleased to announce the immediate availability of Release Candidate 2 for TheHive 3.1.0. It contains numerous bug fixes and enhancements. You can read the full change log if you have nothing better to do with your life.

Among the changes we introduce in this new RC, we would like to highlight the following:

  • #652: the ability to set custom fields as mandatory.
  • #685: the quick case search box on the top navigation bar has been restored as it is highly useful for quick lookups without having to resort to the revamped search page.
  • #667: use alternative authentication methods when certificate authentification is enabled and the client does not present a certificate.

We would also like to thank Marc-André Doll for contributing a nice UX enhancement and GitHub user secdecompiled for adding the ability to view alerts and cases with large descriptions in an easy way.

We encourage you to take TheHive 3.1.0-RC2 for a spin as quickly as you can and report any bug or issue so we can address them for the final release, scheduled in a couple of weeks. Cortex 2.1.0 is still at RC1 and we should be able to make a stable release at the same date as TheHive 3.1.0.

Important Note

We would like to remind you that starting from these versions, we have two release channels: a stable one that should be used for production systems and a pre-release channel that should be used to try the release candidates such as TheHive 3.1-RC2 and Cortex 2.1-RC1, and help us iron out bugs before adding them to the stable channel. Those who love living on the bleeding edge may be tempted by running the release candidates on their production environment given all the candy and icing we added. They are at liberty of doing so but we don’t want to hear anyone one whining about an RC that broke everything and beyond.

We also moved our package and binary repositories to https://bintray.com/thehive-project and Docker images are now under thehiveproject.

Please check TheHive Installation and Cortex Installation guides for further details.

Running into Troubles?

Something does not work as expected? You have troubles installing or upgrading? Spotted new bugs? No worries, please open issues on GitHub or comment on existing ones, join our user forum, contact us on Gitter, or send us an email at support@thehive-project.org. We are here to help.

Unveiling Synapse

When we’re not busy cooking new features, we go back to the trenches and face incidents like many of our fellow analysts who read our publications and use our tools. To do so, we swap our chef toques for firefighter helmets, not only because such shiny headwear is cool, but mainly because incident response (IR) is, at its very heart, firefighting (minus all the dangerous stuff).

If you think about it, when handling incidents you can see everything from cats in trees (spam) to major fire (APT). Thankfully, there are more cats to bring down than fire to extinguish. That being said, a big herd of cats could be a serious threat to your organization, to your mental health or both.

We tend to forget that incident handlers are humans, not robots. Unlike our metal cyberfriends, we need diversity. We can’t risk insanity like Charlie Chaplin in Modern Times if we can avoid it. Unfortunately IR can be highly repetitive, especially if you only have cats to deal with.

Some could say ‘Nah, this is minor, nothing critical here’ but at some point, an analyst brainwashed by the same tasks again and again will be led to fault. In the worst case scenario, one could see an alert and immediately categorize it as false positive without any further consideration. Because ‘this alert is always a false positive’, until the day it is not…

Automation, a Solution?

Intuitively, we look in the direction of automation in order to minimize what we call ‘zombie’ tasks: highly repetitive and brainless tasks that need to be done. We believe that doing so will allow incident handlers to focus on the analysis and not on the tedious side of IR. Ultimately, we hope it will keep analysts stimulated and in a state of alert. Also, it should reduce time and effort spent on the low-hanging fruits.

One of the most dreary tasks in our opinion is to record the context around an incident.
What is the problem? When did it happen? What’s the origin? Who are the victims? How many are there? Answers to these questions let you have an overview of what is happening and are valuable to correlate incidents. So it is worth taking some minutes to add this information to your case. Sadly, most of the time it will look like a succession of ‘Ctrl+C; Alt+Tab; Ctrl+V’ from your incident source to TheHive. Exactly the kind of tasks we want to forego.

Specifications

Having identified the threat that apathetic analysts pose, the root cause (highly repetitive tasks) and a solution (automate the recording of incident context), the question of the implementation has been raised.

The first challenge to solve is the number of incident sources. Almost everything can trigger an incident: a firewall, an IDS, antivirus, SIEM, users, etc… So the application must be designed to accept several sources and must permit to easily integrate new ones. And instead of having to configure multiple alert feeders to supply alerts to TheHive, we would have only one. To some extent, it can be assimilated to a meta feeder.

And if the application works as intended, we still have a second challenge. Let’s say you, dear reader, and ourselves use the galaxy renowned Stargazer IDS. Maybe you’d like to include the full packet capture in the case but we wouldn’t. Using the same product doesn’t mean using it the same way. So we have a variety of sources and for each source, we have a variety of configurations and workflows. Hence any app we design needs to accept multiple configurations and workflows for any given source.

Finally: the third challenge. We want to make the most out of TheHive. Creating cases, creating alerts, assigning cases, adding logs, adding observables … all those actions are not an option.

Synapse

After several trials and failures, we came up with Synapse. Basically it is a Python 3 app which sits between TheHive and your incident sources:

Screen Shot 2018-07-18 at 09.54.28.png
Synapse Overview

To solve the first and third challenge, we rely on connectors. A connector is a Python object dedicated to interact with a security device. In the picture above, you can see the Exchange Connector and TheHive Connector. To extend the number of sources, you just have to develop the connector that corresponds to your device.

Regarding the second challenge, we rely on workflows. Workflows are python scripts who use connectors to automate repetitive tasks when tracking a case. Not happy with the current workflow? Develop your own using the connectors.

At this point, you probably wonder why there’s an API in the picture above. Well, the API is the link between the user and the workflows. By hitting a specific endpoint of the Synapse’s API, the corresponding workflow will be launched. That way the user can choose what to launch, especially if they are only interested in a particular workflow. Moreover, using an API allows us to listen to TheHive’s real-time stream and initiate some actions like closing a QRadar offense when the related case is solved.

At the moment, Synapse includes the Exchange connector and the associated Ews2Case workflow. The workflow features:

  • Case creation from emails
  • Case assignment
  • Adding email bodies to task logs
  • Adding email replies to the case
  • Adding email attachments as observables

And of course, everything is done to minimize the number of clicks! Check the workflow documentation to understand how it works under the hood.

We’re still working on the QRadar connector and the associated workflows but if you can’t wait, have a look at the work done by the community like pierrebarlet’s script.

Check it Out

As usual, Synapse is an open source and free software released under the AGPL (Affero General Public License).

Synapse has its own repository. Start with the user guide and read about the workflow you want to use as you’ll need to configure it.

Troubles?

Shall you encounter any difficulty, please join our user forum, contact us on Gitter, or send us an email at support@thehive-project.org. We will be more than happy to help!

TheHive4py 1.4.0 Released

Version 1.4.0 of the Python API client for TheHive is now available. It is compatible with the freshly released Cerana (TheHive 3.0.0).

We’d like to thank Nick Pratley, a frequent contributor, Bill Murrin, Alexander Gödeke and “srilumpa” for their code additions and documentation.

To update your existing package:

$ sudo pip install thehive4py --upgrade

If you are just getting started with TheHive4py, you can forgo the --upgrade at the end of the command above.

New Features

  • #5: Add a method to update a case, contributed by Nick Pratley
  • #34: Add a get_task_logs method in order to obtain all the task logs associated with a given taskId. Contributed by Bill Murrin
  • #37: A new, very cool case helper class by Nick Pratley
  • #39: Add support for custom fields to the case model
  • #40: Ability to run a Cortex analyzer through the API by Alexander Gödeke
  • #45: Simplify case creation when using a template by providing just its name
  • #49: Add a query builder capability to support TheHive’s DSL query syntax

Paris? Are you There?

Shall you encounter any difficulty, please join our  user forum, contact us on Gitter, or send us an email at support@thehive-project.org. As usual, we’ll be more than happy to help!

Mellifera 1: Bugfixes, Enhancements and Documentation

Last week, we have released Mellifera (TheHive 2.11.0), a major version of your favorite (or soon to be favorite) Security Incident Response Platform. Sadly, some annoying bugs have slipped past our QA (n’est-ce pas Thomas ?).

We are happy to announce the availability of Mellifera 1 (TheHive 2.11.1) which corrects those bugs and adds a few enhancements detailed below.

Issues Corrected

  • #204: update case templates created with previous versions of TheHive.
  • #205: remove duplicate tags associated to an observable present in two cases upon a case merging operation.
  • #206: apply case templates when an alert is converted into a case.

Enhancements

We also took the opportunity of this hotfix to add the following enhancements:

  • #180: merge duplicate tasks during a case merge operation. Starting from this release, if you have waiting tasks (i.e. not assigned) with the same name in cases you’d like to merge, the new merged case will have only one task instead of two.
  • #211: show the number of available analyzer reports for each observable. If an observable has not been analyzed yet, say so.

Documentation

Please note that we have moved all the documentation of TheHive in a new repository. If you are not using TheHive4py 1.2.0 (or future versions), you can send alerts to Mellifera using the API as documented.

Download & Get Down to Work

If you have an existing TheHive installation, please follow the new migration guide.

If you are performing a fresh installation, read the installation guide corresponding to your needs and enjoy. Please note that you can install TheHive using an RPM or DEB package, deploy it using an Ansible script, use Docker, install it from a binary or build it from sources.

Support

Something does not work as expected? You have troubles installing or upgrading? No worries, please join our  user forum, contact us on Gitter, or send us an email at support@thehive-project.org. We are here to help.